Link NetSecWall for Android to your PC
NetSecWall for Android works while it's linked to NetSecWall on a PC with a plan or the free trial. On the PC choose Help ▸ Link a phone…, then scan the QR code in the app or type the code. Up to 5 phones per PC.
NetSecWall for Windows NetSecWall for AndroidOn this page
NetSecWall for Android is included with every NetSecWall plan for Windows (Monitor, Plus, Family and Pro) and with the free 7-day trial, and it does nothing until it's linked to a PC that has one. To link it, choose Help ▸ Link a phone… in NetSecWall on the PC, then tap Scan the code or Type the code instead in the app on the phone. One PC can have up to 5 phones linked. The phone has no account of its own: it runs on the PC's plan.
Before you start
- NetSecWall on a Windows PC, on a plan or still in its trial. No NetSecWall yet? Start the 7-day trial.
- NetSecWall for Android on the phone, installed from the Android page. Until it's linked, it opens to Link your PC.
- Both online. The phone and the PC don't need to be on the same Wi-Fi: the code and the link both go through netsecwall.com.
Show the code on your PC
- Open NetSecWall on the PC.
- In the menu bar, choose Help ▸ Link a phone…
- A QR code appears, with a code like
K7Q2-M9XD-3Funder it and a countdown. The code works once and expires after 10 minutes. If it runs out, click Get a new code.
If the PC's trial has ended and it has no plan, NetSecWall says "Linking a phone needs an active NetSecWall plan or the free trial" instead of showing a code. If 5 phones are already linked, it asks you to unlink one first.
Link by scanning the QR code
- Open NetSecWall on the phone. It shows Link NetSecWall to your PC.
- Tap Scan the code. The first time, Android asks whether NetSecWall may use the camera. Allow it.
- Point the camera at the QR code on the PC's screen. The phone links as soon as it reads the code.
The camera is used only to read this code. The frames are decoded on the phone and never stored or sent. If you'd rather not allow the camera, type the code instead.
If you scanned the PC's QR code with the phone's ordinary camera app, it opens netsecwall.com/link. That page shows the code in large type, with a download button if the app isn't installed yet. It reads the code on your phone and sends it nowhere.
Link by typing the code
- On the Link your PC screen, tap Type the code instead.
- Type the code shown under the QR code on the PC, for example
K7Q2-M9XD-3F. Capitals and dashes don't matter, and the letters O, I and L are read as 0, 1 and 1. - Tap Link.
If the app says "That code is wrong or has expired", get a new one on the PC and try again.
After linking
- Turn protection on. Tap Turn on and accept Android's VPN prompt. The app overview explains what the VPN filter does.
- The phone checks once a day. It asks netsecwall.com whether the PC's plan or trial is still active, and nothing else. Settings shows Linked to and your PC's name, with when it last checked. Tap it to check now.
- The PC lists the phone. Help ▸ Link a phone… shows every linked phone under Linked phones, by model name (for example "Google Pixel 8"), with the app version and when it was last seen.
Alerts and control from the phone (Family and Pro)
With NetSecWall Family or Pro on the PC, or the free trial, a linked phone also becomes a remote for the PC. This needs the phone to be linked by scanning the PC's code: a typed code turns protection on but can't carry the keys these features use. To add them later, open Settings on the phone, tap Scan the code on your PC, and scan a new code from Help ▸ Link a phone….
The app then has a PC tab:
- The PC at a glance. Whether it's protected, today's blocked and allowed lookups, its speed and connections, and when it last reported.
- Pause protection for 15 minutes or an hour, or Resume it.
- Block all internet. Choose For 15 minutes, For 1 hour or Until I turn it off. A timed block ends on its own, even if the PC restarts. While the block is on, NetSecWall keeps its own connection to the phone open, so you can turn it off from the phone.
- Apps. Block or unblock an app on the PC, or close its connections.
- Family. Turn parental controls on or off and change the blocked categories, bedtime and daily time limit, without the PC's parental password.
- Same blocked categories on phone and PC. Switch it on and a category you block on one side is blocked on the other. Switching it on never unblocks anything.
The PC's alerts, such as a blocked threat or protection being turned off, arrive as notifications on the phone. In Learning mode, a new app on the PC that wants to connect also appears on the phone, with Allow once and Block. The PC waits 30 seconds for an answer, then blocks the app for now. After that the prompt stays on the PC tab, where Always allow or Block still becomes a rule on the PC.
On the same Wi-Fi, the PC talks to the phone directly. Elsewhere, the messages go through netsecwall.com, end-to-end encrypted: we pass them on but can't read them. The privacy policy lists what they contain.
What the 14-day grace period means
The phone doesn't stop protecting you the moment something changes. If the PC's plan ends (including the trial running out), the PC unlinks the phone, or the phone can't reach netsecwall.com for its daily check, protection carries on for 14 days. The 14 days count from the last time netsecwall.com confirmed the PC's plan.
During the grace period the app shows Protection stops in and the days left, and sends a reminder 7, 3 and 1 day before it stops. After 14 days protection switches off, and the app opens to Link again to keep protecting. To turn it back on:
- The plan ended: renew the PC's plan, or link the phone to a PC with an active plan or trial.
- The PC unlinked the phone: link it again with a new code from the PC.
- The phone was offline: connect it to the internet so it can check, or link it again.
Your rules, overrides and settings stay on the phone while it's unlinked.
Unlink a phone
You can unlink from either side.
- From the PC. Choose Help ▸ Link a phone…, find the phone under Linked phones, click Unlink and confirm. The phone finds out at its next daily check, and the 14-day grace period above applies.
- From the phone. Open Settings, tap Unlink this phone and confirm. Protection on the phone stops right away. To use it again, link it with a new code.
Unlinking frees one of the PC's 5 places. To move a phone to another PC, link it with a code from the other PC: the phone replaces its old link with the new one.
Up to 5 phones per PC
A plan covers the PC it's activated on and up to 5 phones linked to that PC. To link a sixth, unlink one first. A phone is linked to one PC at a time.
Frequently asked questions
Do I need a NetSecWall account to link a phone?
No. The phone has no account of its own and uses the plan of the PC it's linked to. The PC needs a plan or the free trial.
Does linking work on every plan?
Yes. Monitor, Plus, Family and Pro all include NetSecWall for Android on up to 5 phones, and so does the free 7-day trial.
Do the phone and the PC need to be on the same network?
No. Linking and the daily check both go through netsecwall.com, so the phone keeps working away from home.
What does netsecwall.com keep about my phone?
A link id, a SHA-256 hash of a secret only the phone holds, the phone's model name, the app version, and when it was linked and last checked. No IP address is stored with it, and nothing about what you browse. See the Android section of the privacy policy.
What happens when my 7-day trial ends?
The same as when a plan ends: the phone keeps protecting you for 14 days, with reminders, then stops until the PC has a plan. Buying a plan for the PC during those 14 days keeps the phone protected without linking it again.